Rear Energy Absorber Replacement

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Energy Absorber

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the rear bumper fascia molding. Refer to Rear Bumper Fascia Molding Replacement . Remove the rear fascia. Refer to Rear Bumper Fascia Replacement .
1	Rear Fascia Absorber Retainer (Qty: 9)
2	Rear Fascia Absorber

Callout

Component Name

Preliminary Procedures

Remove the rear bumper fascia molding. Refer to Rear Bumper Fascia Molding Replacement .
Remove the rear fascia. Refer to Rear Bumper Fascia Replacement .

Rear Fascia Absorber Retainer (Qty: 9)

Rear Fascia Absorber