Front Bumper Fascia Support Replacement

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fascia Support Replacement - Front Bumper

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the distance sensing cruise control module, if equipped. Refer to Distance Sensing Cruise Control Module Replacement . Remove front fascia. Refer to Front Bumper Fascia Replacement .
1	Front Fascia Support Bolt (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 10 N.m (89 lb in)
2	Front Fascia Support Bolt (Qty: 2) Tighten: 10 N.m (89 lb in)
3	Front Fascia Support