Front Bumper Fascia Energy Absorber Replacement

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Energy Absorber Replacement - Front

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove front fascia. Refer to Front Bumper Fascia Replacement .
1	Fascia Absorber Retainer (Qty: 4)
2	Front Fascia Absorber Tip: Disconnect front object alarm sensor. Refer to Front Object Alarm Sensor Replacement .