Adjustment Procedure
WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the 2 mini wedge striker fasteners (1).
- Tighten the 2 striker fasteners so that the striker can still be moved.
- Place the J 39346-A over the striker.
- Hold the outside door handle out and gently push the door flush against the body to locate the striker.
- Slowly open the door.
Tighten: Tighten the striker fasteners to 27 N.m (20 lb ft).
- Remove the J 39346-A .
- After the striker adjustment touch up any exposed or unpainted surface with body color paint.
CAUTION:
Refer to Fastener Caution
.