Circuit/System Verification
WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, observe the function of the door locks while performing the LOCK and UNLOCK command using the door lock switch, all doors should perform the LOCK and UNLOCK functions.
- If any door fails to LOCK or UNLOCK, refer to Power Door Locks Malfunction .
- Observe the scan tool Key Cyl Unlock Switch parameters while the turning and holding the key in the driver door lock cylinder to the unlock position, the parameter should change from Idle to Unlock.