LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Door Lock System & Door Handles) >> Diagnostic Information and Procedures >> DTC B3657 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON, observe the scan tool Valet Switch parameter while pressing the top and bottom of the valet switch. The parameter should change between Active and Inactive.