LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Frame And Underbody) >> Repair Instructions >> Front Frame Cushion or Insulator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Cradle Bushing With Rubber Mallet
    GM1361431Courtesy of GENERAL MOTORS CORP.
  1. Remove the frame. Refer to Front Frame Replacement (4.6L) .
  2. Remove cradle bushing with a rubber mallet.
scientia non olet · About LEMON Manuals