Radiator Surge Tank Replacement
WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure:
NOTE:
Drain only the fluid from the radiator surge tank. Drain the cooling system. Refer to Cooling System Draining and Filling (Vac-N-Fill) or Cooling System Draining and Filling (Static Fill) . |
|
| 1 | Push Pin Retainer Tip: Using J 38185 , position the radiator surge tank hose clamp aside and remove the hose from the radiator surge tank. See Special Tools . |
| 2 | Surge Tank Retaining Nut
CAUTION:
Refer to Fastener Caution
.
Tighten: 6 N.m (53 lb in) |
| 3 | Radiator Surge Tank Assembly Tip: Disconnect the quick connect and remove the lower surge tank hose. |