LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Cooling System) >> Repair Instructions >> Engine Coolant Fan Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Engine Cooling Fan
    GM1664773Courtesy of GENERAL MOTORS CORP.
  1. Install the cooling fan blade.
    2. Fig 2: Identifying Cooling Fan Blade Retaining Nut
    GM1664766Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Install the cooling fan retaining nut.

    Tighten:  Tighten the nut to 6 N.m (53 lb in).

  3. Install the cooling fan shroud assembly. Refer to Engine Coolant Fan Shroud Replacement .
scientia non olet · About LEMON Manuals