Rear Compartment Lid Hinge Replacement

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hinge Replacement - Rear Compartment Lid

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove rear compartment lid. Refer to Rear Compartment Lid Replacement . Remove Torque rods. Refer to Rear Compartment Lid Hinge Torque Rod Replacement .
1	Rear Compartment Hinge Nut (Qty: 1) CAUTION: Refer to Fastener Caution . Tighten: 25 N.m (19 lb ft)
2	Rear Compartment Lid Hinge Bolts (Qty: 2) Tighten: 25 N.m (19 lb ft)
3	Rear Compartment Hinge