LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Front Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Hood Seal
    GM457414Courtesy of GENERAL MOTORS CORP.
  1. Install the front hood seal to the hood.
  2. Install the push in retainers in order to secure the front hood seal to the hood.
  3. Close the hood.