Left Cylinder Head Rear Face
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Left Cylinder Head Rear Face
| Hole Location | Thread Size | Drill | Counter Bore Tool | Stop Collar | Tap | Driver | Insert | Drill Depth (Maximum) | Tap Depth (Minimum) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| - | - | J 42385- | MM | (IN) | MM | (IN) | |||||
| 1 | 16 x 1.5 | 861 | 862 | N/A | 863 | 864 | 860 | 20 | 0.787 | 16 | 0.630 |
| 21 | 16 x 1.5 | 861 | 862 | N/A | 863 | 864 | 860 | 20 | 0.787 | 16 | 0.630 |
| 3 | 8 x 1.25 | 206 | 207 | N/A | 208 | 209 | 210 | 27 | 1.063 | 22 | 0.866 |
| 1 Hole 2 will require that the oil passage hole be redrilled | |||||||||||