Engine Block Lower Face
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Engine Block Lower Face
| Hole Location | Thread Size | Drill | Counter Bore Tool | Stop Collar | Tap | Driver | Insert | Drill Depth (Maximum) | Tap Depth (Minimum) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| - | - | J 42385- | MM | (IN) | MM | (IN) | |||||
| 1 | 10 x 1.5 | 511 | N/A | N/A | 512 | 513 | 514 | 32 | 1.260 | 26.5 | 1.043 |
| 2 | 8 x 1.25 | 610 | N/A | N/A | 208 | 209 | 620 | THRU | THRU | ||
| 3 | 8 x 1.25 | 610 | N/A | N/A | 208 | 209 | 620 | 37 | 1.457 | 32 | 1.260 |
|
IMPORTANT:
Items required for Main Bearing repair (3) 510 bolts (1) 306 Plate SPX (1) 307 bushing (1) 308 alignment pin |
|||||||||||