LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Automatic Transmission - 4T80-E - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Second Clutch Plates Installation

Second Clutch Plates Installation

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Inspection Points On Second Clutch Plates
    GM11967Courtesy of GENERAL MOTORS COMPANY
  1. Inspect the second clutch wave plate (431) and all of the steel plates (433) for burning or damage.
    2. Fig 2: Installing Second Clutch Plates
    GM11968Courtesy of GENERAL MOTORS COMPANY
  2. Install the following parts:
    1. The second clutch backing plate (434) with flat side facing up
    2. The four fiber clutch plates (435)
    3. The four steel clutch plates (433)
    4. The backing plate (432)
    5. The wave plate (431)
scientia non olet · About LEMON Manuals