LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Automatic Transmission - 4T80-E - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Fourth Servo Removal

Fourth Servo Removal

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying 4th Servo Piston Assembly And Cover
    GM11837Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Hold the servo cover in place until all the bolts are removed evenly or the apply pin will damage the bore.

  1. Remove the three 10-mm bolts (534) from the servo cover.
  2. Remove the following parts:
    • The servo cover (524)
    • The servo assembly (529)
    • The spring (533)