Forward and Coast Clutch Installation

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

J 39053 Forward and Coast Clutch Assembly Installer

For equivalent regional tools, refer to Special Tools .

Fig 1: Forward & Coast Clutch & Support Assembly

Courtesy of GENERAL MOTORS COMPANY

WARNING:

The forward and coast clutch assembly weighs approximately 50 lbs. Personal injury may result if you drop the assembly.

Install the J 39053 clutch assembly installer into the forward and coast clutch and support assembly (636-834).
Using a chain hoist or suitable lifting equipment, install the forward and coast clutch and support assembly (636-834) into the barrel of the case. The two bolt holes and feed holes must line up with the holes in the bottom of the case.