LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Automatic Transmission - 4T80-E - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Control Valve Lower Body Disassemble

Control Valve Lower Body Disassemble

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Low/Reverse Servo Components
    GM15460Courtesy of GENERAL MOTORS COMPANY
  1. Remove the low/reverse servo piston retaining ring (932).
  2. Push on the low/reverse apply pin (931) to remove the low/reverse servo assembly from the control valve body.
  3. Remove the return spring (901).
  4. Remove the retaining ring (902) from the low/reverse servo assembly and push out the servo pin (931).
  5. Remove the following parts:
    • The servo cushion spring (934)
    • The sleeve (980)
    • The spring washer (933)
  6. Inspect the following items for damage:
    • The low/reverse servo piston (928)
    • The low/reverse servo seals (929, 930)
    7. Fig 2: Identifying Ball Check Capsule
    GM15462Courtesy of GENERAL MOTORS COMPANY
  7. Remove the following parts:
    • The spring retainer (904)
    • The ball check capsule (905)
    • The ball (979)
  8. Inspect all parts for scratches, debris, and damage.
    9. Fig 3: Locating 3-4 Shift Valve Assembly
    GM15465Courtesy of GENERAL MOTORS COMPANY
  9. Remove the following parts:
    • The retainer clip (308)
    • The bore plug (914)
    • The 3-4 shift valve (912)
    • The 3-4 shift valve spring (911)
  10. Inspect the 3-4 shift valve (912) for scratches or debris.
    11. Fig 4: 1-2 Shift Solenoid Valve
    GM1592025Courtesy of GENERAL MOTORS COMPANY
  11. Remove the following parts:
    • The retainer clip (308)
    • The 1-2 shift solenoid valve (909)
    • The 1-2 shift valve B (920)
    • The 1-2 shift valve A (919),
    • The 1-2 shift valve spring (918)
  12. Inspect the 1-2 shift solenoid valve (909) for damage.
  13. Inspect the 1-2 shift valves A and B (919, 920) for scratches or debris.
    14. Fig 5: Solenoid Screen Assembly
    GM1592056Courtesy of GENERAL MOTORS COMPANY
  14. Remove the solenoid screen assembly (917).
  15. Inspect the solenoid screen assembly (917) for excessive debris.
    16. Fig 6: 2-3 Shift Solenoid Valve
    GM1592062Courtesy of GENERAL MOTORS COMPANY
  16. Remove the following parts:
    • The retainer clip (308)
    • The 2-3 shift solenoid valve (910)
    • The 2-3 shift valve D (908)
    • The 2-3 shift valve C (907)
    • The 2-3 shift valve spring (906)
  17. Inspect the 2-3 shift solenoid valve (910) for damage.
  18. Inspect the 2-3 shift valves C and D (907, 908) for scratches or debris.
    19. Fig 7: Manual Valve & Link
    GM1592064Courtesy of GENERAL MOTORS COMPANY
  19. Remove the manual valve link (913) and the manual valve (916).
  20. Inspect the manual valve (916) for scratches or damage.
scientia non olet · About LEMON Manuals