Channel Plate Assemble

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

J 39630-1 Guide Pins
J 39630-2 Guide Pins

For equivalent regional tools, refer to Special Tools .

Fig 1: Locating Lower Channel Plate Accumulator Bores & Mating Surfaces

Courtesy of GENERAL MOTORS COMPANY

Inspect the lower channel plate accumulator bores and mating surfaces for scratches or damage.

Fig 2: Inspection Areas On Lower Channel Plate

Courtesy of GENERAL MOTORS COMPANY

Inspect the bottom side of the lower channel plate for damage to the bolt holes or debris in passages.

Fig 3: Spacer Plate, Gasket Assembly & Lower Channel Plate

Courtesy of GENERAL MOTORS COMPANY

Insert the J 39630-1 guide pins into the lower channel plate (900) and rest the channel plate on the guide pin heads.
Install the J 39630-2 guide pins into the lower channel plate (900).
Install the spacer plate and gasket assembly (935) onto the lower channel plate (900).