Valve Lifter Removal - Left Side

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Left Stationary Hydraulic Lash Adjusters (SHLA)

Courtesy of GENERAL MOTORS COMPANY

CAUTION:

Refer to Valve Lifter Priming Caution .

NOTE:

Ensure each camshaft follower remains matched to the original stationary hydraulic lash adjuster (SHLAs) and original location the components were assembled in.

Remove the stationary hydraulic lash adjuster (SHLAs) from the left cylinder head lifter bores.
Store the camshafts, followers and SHLAs in a clean, secure location.