Intake Manifold Disassemble

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Intake Manifold-To-Cylinder Head Gaskets

Courtesy of GENERAL MOTORS COMPANY

IMPORTANT:

Do not reuse the intake manifold-to-cylinder head sealing gaskets.

Remove and discard the intake manifold-to-cylinder head gaskets.

Fig 2: Identifying Intake Manifold Vacuum Cap

Courtesy of GENERAL MOTORS COMPANY

Remove the intake manifold vacuum cap.

Fig 3: Identifying Intake Manifold Plug

Courtesy of GENERAL MOTORS COMPANY

Remove the intake manifold plug.

Fig 4: Identifying Intake Manifold Sight Shield Ball Studs

Courtesy of GENERAL MOTORS COMPANY

Remove the intake manifold sight shield ball studs.