LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Engine Mechanical - 4.6L - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Drive Belt Tensioner Installation

Drive Belt Tensioner Installation

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Drive Belt Tensioner Bolt
    GM522492Courtesy of GENERAL MOTORS COMPANY
  1. Install the drive belt tensioner. Be sure to locate the tensioner anchor pin in the cylinder head recess.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the drive belt tensioner bolt and tighten to 50 N.m (37 lb ft).
scientia non olet · About LEMON Manuals