LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Engine Mechanical - 4.6L - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Crankshaft and Bearing Installation >> Crankshaft Installation Procedure

Crankshaft Installation Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Crankshaft Sprocket Drive Pin
    GM685375Courtesy of GENERAL MOTORS COMPANY
  1. Install the crankshaft sprocket drive pin (1).
    2. Fig 2: Ensuring Proper Pin Height
    GM685378Courtesy of GENERAL MOTORS COMPANY
  2. Ensure pin height (1) is 2.75-3.25 mm (0.0689-0.1280 in).
    3. Fig 3: View of Crankshaft
    GM204793Courtesy of GENERAL MOTORS COMPANY
  3. Gently lower the crankshaft into position in the cylinder block.
  4. Make sure the crankshaft turns without binding or noise.
scientia non olet · About LEMON Manuals