Camshaft Cover Removal - Right Side

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 44212 Camshaft Holding Tool

Fig 1: Identifying Ignition Coil Ground Strap & Bolt

Courtesy of GENERAL MOTORS COMPANY

Remove the right camshaft cover ignition coil ground strap bolt.
Remove the right cylinder head ignition coil ground strap bolt.
Remove the right ignition coil ground strap.

Fig 2: View Of Camshaft Cover & Bolts

Courtesy of GENERAL MOTORS COMPANY

Remove the camshaft cover bolts.
Remove and discard the camshaft cover grommets and camshaft cover bolts if they are serviced with the grommet.
Lift the camshaft cover from the cylinder head.

Fig 3: Using Camshaft Holding Tool

Courtesy of GENERAL MOTORS COMPANY

Install the J 44212 to the right cylinder head camshafts.