LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Engine Mechanical - 4.6L - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Camshaft Cover Assemble

Camshaft Cover Assemble

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fresh Air Hose Fitting & Right Camshaft Cover
    GM522719Courtesy of GENERAL MOTORS COMPANY
  1. Install into the right camshaft cover the fresh air hose fitting.
  2. Fig 2: View Of Camshaft Cover Bolts
    GM576614Courtesy of GENERAL MOTORS COMPANY
  3. Install the camshaft cover bolt grommets.
  4. Install the camshaft cover bolts.
  5. Fig 3: View of Camshaft Cover
    GM1341178Courtesy of GENERAL MOTORS COMPANY
  6. Install the NEW left camshaft cover gasket.
  7. Install the NEW left spark plug port seals.
  8. Fig 4: View of Right Camshaft Cover Gasket
    GM1341181Courtesy of GENERAL MOTORS COMPANY
  9. Install the NEW right camshaft cover gasket.
  10. Install the NEW right spark plug port seals.