LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Wiring Systems And Power Management - Component & Splice Pack Connector End Views) >> Component Connector End Views >> Seat Cushion Ventilation Heat and Cool Module - Driver (KB6)

Seat Cushion Ventilation Heat and Cool Module - Driver (KB6)

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Seat Cushion Ventilation Heat And Cool Module - Driver (KB6) Connector End View
GM1664607Courtesy of GENERAL MOTORS CORP.
Seat Cushion Ventilation Heat and Cool Module - Driver (KB6)

Pin Wire Circuit Function
1 1 PK 7022 Driver Seat Cushion Heated/Cooled Ventilation Module Heat Control
2 0.5 D-BU 6143 Driver Seat Blower Supply Voltage
3 1 L-GN 6216 Driver Seat Cushion Heated/Cool Ventilation Module Cool Control
4 0.5 D-GN 6238 Driver Seat Blower Low Reference
5 0.35 OG/PK 7018 Driver Seat Cushion Temperature Sensor Signal
6 - - Not Used
7 0.35 BK/TN 6218 Driver Seat Cushion Blower Speed Control
8 0.35 OG/WH 7019 Driver Seat Cushion Temperature Sensor Low Reference
Connector Part Information 
  • OEM: E3578-003
  • Service: See Catalog
  • Description: 8-Way M (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
scientia non olet · About LEMON Manuals