LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Wiring Systems And Power Management - Component & Splice Pack Connector End Views) >> Component Connector End Views >> Outside Moisture Sensor (CE1)

Outside Moisture Sensor (CE1)

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Outside Moisture Sensor (CE1) Connector End View
GM605502Courtesy of GENERAL MOTORS CORP.
Outside Moisture Sensor (CE1)

Pin Wire Circuit Function
1 0.35 L-GN 482 Outside Moisture Sensor Signal 2
2 0.35 TN/YE 481 Outside Moisture Sensor Signal 1
3 0.5 BK 850 Ground
4 0.35 YE 643 Accessory Voltage
Connector Part Information 
  • OEM: 43645-0400
  • Service: 15306387
  • Description: 4-Way F Micro Fit (BK)
Terminal Part Information 
  • Terminal/Tray: 43030-0010/23
  • Core/Insulation Crimp: Pins 1, 2, 4 - H/H
  • Core/Insulation Crimp: Pins 3 - See Terminal Repair Kit
  • Release Tool/Test Probe: J-38125-213/J-35616-64B (L-BU)
scientia non olet · About LEMON Manuals