LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Wiring Systems And Power Management - Component & Splice Pack Connector End Views) >> Component Connector End Views >> Heated Seat Module - Rear X2 (KA6)

Heated Seat Module - Rear X2 (KA6)

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Heated Seat Module - Rear X2 (KA6) Connector End View
GM1664463Courtesy of GENERAL MOTORS CORP.
Heated Seat Module - Rear X2 (KA6)

Pin Wire Circuit Function
1 1 TN/D-GN 4040 Battery Positive Voltage
2 0.8 BK 750 Ground
3-4 - - Not Used
5 0.35 L-GN/WH 7046 Left Rear Heated Seat Back Temperature Sensor Low Reference
6 0.35 L-BU/WH 7048 Left Rear Passenger Heated Seat Cushion Temperature Sensor Low Reference
7 0.35 YE/BK 7052 Right Rear Heated Seat Back Low Reference
8 0.35 OG/WH 7054 Right Rear Cushion Temperature Sensor Low Reference
Connector Part Information 
  • OEM: 6098-4713
  • Service: 88988652
  • Description: 8-Way F (BK)
Terminal Part Information 
  • Pins: 1, 2
  • Terminal/Tray: 8100-4444/22
  • Core/Insulation Crimp: 2/A
  • Release Tool/Test Probe: 15315247/J-35616-35 (VT)
  • Pins: 5-8
  • Terminal/Tray: 8100-4443/22
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-35 (VT)