LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Wiring Systems And Power Management - Component & Splice Pack Connector End Views) >> Component Connector End Views >> Amplifier X1 (UQA)

Amplifier X1 (UQA)

WARNING: This page is about a different car, the 2009 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Amplifier X1 (UQA) Connector End View
GM1664464Courtesy of GENERAL MOTORS CORP.
Amplifier X1 (UQA)

Pin Wire Circuit Function
1 2 WH 6765 Subwoofer Low Level Audio Signal
2 2 TN/PK 6766 Subwoofer Low Level Audio (-)
3 - - Not Used
4 3 TN/D-BU 3440 Battery Positive Voltage
5-7 - - Not Used
8 3 BK 550 Ground
Connector Part Information 
  • OEM: 6098-4798
  • Service: See Catalog
  • Description: 8-Way F (GY)
Terminal Part Information 
  • Terminal/Tray: 8100-4445/22
  • Core/Insulation Crimp: Pins 1, 2 - 4/4
  • Core/Insulation Crimp: Pins 4, 8 - F/D
  • Release Tool/Test Probe: 15315247/J-35616-35 (VT)