LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Engine Controls And Fuel - 4.6L - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Service Bay Test >> Test Procedure

Test Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If the Service Bay Test aborts or fails, a DTC will NOT be set.

  1. Install a scan tool.
  2. Select the Service Bay Test with the scan tool.
    3. WARNING:

    Refer to Road Test Warning .

  3. Follow the instructions on the scan tool.
    • If the test aborts, correct the condition for running the test, then retest.
    • If the test fails, repair the vehicle for the condition indicated by the failure message on the scan tool.
  4. Verify that the EVAP inspection/maintenance system status is set to YES.
scientia non olet · About LEMON Manuals