Circuit/System Verification
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, command the MIL ON and OFF with a scan tool. The MIL should turn ON and OFF as commanded.
- Command the MIL ON and OFF with a scan tool while observing the following control circuit status parameters:
- MIL Ckt. Short Gnd Test Status
- MIL Ckt. Open Test Status
- MIL Ckt. Short Volts Test Status
Each parameter should change between OK to Not run or from Not Run to OK.