LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Engine Controls And Fuel - 4.6L - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P0016 >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Idle the engine at normal operating temperature. Observe the DTC information with a scan tool. DTC P0016 should not set.
    • If a DTC sets, inspect for the following and repair as necessary:
    • The correct installation of the camshaft sensor
    • The correct installation of the crankshaft sensor
    • A timing chain tensioner condition
    • An incorrectly installed timing chain
    • Excessive play in the timing chain or sprockets
    • A timing chain that jumped teeth
  2. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
scientia non olet · About LEMON Manuals