LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (Shift Lock Control System) >> Diagnostic Information and Procedures >> DTC B2705 (Floor Shift) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, Clear the DTC. Observe the scan tool BCM Brake Applied Output Signal parameter. The parameter should change from ON to OFF when the brake pedal is depressed.
  2. Press the brake pedal, the vehicle operator should not be able to move the shifter lever out of the PARK position.
scientia non olet · About LEMON Manuals