LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (Automatic Transmission - 4T80-E - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC P0961 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start and idle the engine.
  2. Using a scan tool, select PC Solenoid under the Special Functions.
  3. While monitoring the PC Sol. Actual Current and the PC Sol. Ref. Current parameters, command the PC solenoid reference current from 0.1 amps through 1.1 amps. The PC Sol. Actual Current should not vary from the PC Sol. Ref. Current by more than 0.16 amps.
scientia non olet · About LEMON Manuals