Conditions for Setting the DTC
P0742
The TCC slip speed is 60 RPM or greater for 4 seconds, twice during the same ignition cycle.
P0752
The following conditions occur twice in 1 trip:
Condition 1
The TCM commands 2nd gear and the gear ratio indicates 1st gear, 2.81:1-3.10:1, for 2 seconds.
Condition 2
The TCM commands 3rd gear and the gear ratio indicates 4th gear, 0.64:1-0.71:1, for 3 seconds.
P0757
The following conditions occur twice in 1 trip:
Condition 1
The TCM commands 3rd gear with the engine torque between 50-1,492 N.m (37-1,100 lb ft) and the gear ratio indicates 2nd gear, 1.54:1-1.71:1, for 2 seconds.
Condition 2
The TCM commands 4th gear with the engine torque between 50-1,492 N.m (37-1,100 lb ft) and the gear ratio indicates 1st gear, 2.81:1-3.10:1, for 2 seconds.