LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Automatic Transmission - 4T80-E - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Torque Converter Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Torque Converter Cover
    GM627396Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Install the torque converter cover.

    Tighten 

    Tighten the cover bolt to 12 N.m (106 lb in).

  2. Install the engine-to-transmission brace and attaching bolts.

    Tighten 

    Tighten the bolts to 47 N.m (35 lb ft).

  3. Lower the vehicle.
scientia non olet · About LEMON Manuals