LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Automatic Transmission - 4T80-E - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Parking Gear Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Final Drive Internal Gear & Snap Ring
    GM687607Courtesy of GENERAL MOTORS COMPANY
  1. Remove the final drive assembly. Refer to Front Differential Carrier Assembly Replacement .
  2. Remove the final drive internal gear snap ring (135).
  3. Remove the final drive internal gear.
  4. Remove snap ring from park gear.
  5. Remove park gear from housing.