LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Automatic Transmission - 4T80-E - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Differential Carrier Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Drive Carrier & Differential Carrier
    GM15506Courtesy of GENERAL MOTORS COMPANY
  1. Locate the dowels on the final drive carrier (100) and insert these dowels into the holes in the differential carrier (110) for proper assembly.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the differential carrier bolts (119).

    Tighten 

    Tighten the bolts using a star pattern to 70-76 N.m (52-56 lb ft).

  3. Install the case extension. Refer to Case Extension Replacement .
scientia non olet · About LEMON Manuals