LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Automatic Transmission - 4T80-E - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Case Extension Axle Seal Replacement - Right Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Right-hand Drive Axle Seal
    GM683824Courtesy of GENERAL MOTORS COMPANY
    IMPORTANT:

    Be careful not to damage the transmission case extension when installing the drive axle seal.

  1. Install the right-hand drive axle seal (1) using the .
  2. Install the drive axle. Refer to Wheel Drive Shaft Replacement (FE7) , Wheel Drive Shaft Replacement (FE1, FE3) .