Removal Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .

Fig 1: Identifying Outer Tie Rod & Retaining Nut

Courtesy of GENERAL MOTORS COMPANY

Remove the outer tie rod retaining nut (2).

Fig 2: Identifying Tie Rod & Jam Nut

Courtesy of GENERAL MOTORS COMPANY

Loosen the jam nut (2) on the inner tie rod (1).

Fig 3: Steering Linkage Puller & Outer Tie Rod Assembly

Courtesy of GENERAL MOTORS COMPANY

Using J 24319-B remove the outer tie rod from the steering knuckle.

Fig 4: View Of Outer Tie Rod & Inner Tie Rod

Courtesy of GENERAL MOTORS COMPANY

Remove the outer tie rod (3) from the inner tie rod (1).