LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 142 (Power Steering System) >> Repair Instructions >> Power Steering Fluid Reservoir Replacement - Off Vehicle >> Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Mounting Bracket Assembly, Pump, & Bolts
    GM295819Courtesy of GENERAL MOTORS COMPANY
  1. Remove the mounting bracket bolts (3) from the mounting bracket assembly (2).
  2. Remove the mounting bracket assembly (2) from the pump (1).
  3. Fig 2: View Of Reservoir Assembly & Retaining Clips
    GM295820Courtesy of GENERAL MOTORS COMPANY
  4. Remove retaining clips (2) from the reservoir assembly (1) using J-42649 .
  5. Fig 3: Identifying Hydraulic Pump Housing, Reservoir, & O-ring Seal
    GM295822Courtesy of GENERAL MOTORS COMPANY
  6. Remove reservoir (1) from the hydraulic pump housing (3).
  7. Remove the O-ring seal (2) from the reservoir (1).
  8. Discard the O-ring seal (2).