LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Hydraulic Brake System) >> Repair Instructions >> Brake Fluid Level Indicator Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Brake Fluid Level Sensor
    GM440859Courtesy of GENERAL MOTORS COMPANY
  1. Align the brake fluid level sensor to the master cylinder reservoir.
  2. Press the brake fluid level sensor into the master cylinder reservoir.
  3. Connect the electrical connector to the brake fluid level sensor.
scientia non olet · About LEMON Manuals