LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Power Seat System) >> Diagnostic Information and Procedures >> Lumbar Support Inoperative (With Memory A45) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, verify that all manual power seat functions operate when being controlled by the seat adjuster switches.
  2. Observe the scan tool Driver Position Module lumbar switch parameters for Seat 1 and Seat 2 while pressing the appropriate lumbar switch. The reading should change between Inactive and Active.
    • If the reading does not change between the specified values, refer to the Lumbar Switch Circuit Test in Circuit/System Testing .
  3. If all lumbar switch inputs to the MSM function normal, refer to the Lumbar Motor Control Circuit Test in Circuit/System Testing .
scientia non olet · About LEMON Manuals