LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Power Seat System) >> Diagnostic Information and Procedures >> DTC B1340 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

B1340 0B 

The absolute current has exceeded the maximum value allowed.

B1340 42 

This DTC will set if the module calibration is not programmed.

B1340 4B 

This DTC will set if the module calibration is not learned.

scientia non olet · About LEMON Manuals