LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Seat Heating System And Seat Cooling System) >> Repair Instructions >> Rear Seat Cushion Heater Replacement

Rear Seat Cushion Heater Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Seat Cushion Heater Assembly, Pad & Cover
GM1571698Courtesy of GENERAL MOTORS COMPANY
Rear Seat Cushion Heater Replacement

Callout Component Name
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .
Preliminary Procedure 
Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .
1 Cover, Rear Seat Cushion
  1. Remove the staples that secure the seat cushion cover and pad to the seat cushion frame.
  2. The cover is secured to the pad with hook and loop fasteners.
2 Heater Assembly, Rear Seat Cushion (Qty: 2)
TIP:  Peel the heater elements from the seat cushion pad and disconnect the electrical connector.
3 Pad, Rear Seat Cushion
scientia non olet · About LEMON Manuals