Rear Brake Shield Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disc Brake Splash Shield - Rear

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Raise the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation . Remove the wheel bearing/hub assembly. Refer to Rear Wheel Bearing and Hub Replacement (FE1, FE3) , Rear Wheel Bearing and Hub Replacement (FE7) .
1	Rear Splash Shield

Callout

Component Name

Preliminary Procedures

Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
Remove the wheel bearing/hub assembly. Refer to Rear Wheel Bearing and Hub Replacement (FE1, FE3) , Rear Wheel Bearing and Hub Replacement (FE7) .

Rear Splash Shield