Rear Toe Adjustment (FE1, FE3)
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the cam lock nut (1) on the adjustment link.
- In order to adjust the toe, rotate the cam bolt using an 8 mm socket. Refer to Wheel Alignment Specifications .
Tighten
Tighten the cam lock nut to 75 N.m (55 lb ft).
NOTE:
Complete the left and right rear toe adjustments separately, per wheel. Use the following procedure.
CAUTION:
Refer to Fastener Caution .