Installation Procedure
WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Position the EGR valve pipe to the exhaust manifold.
- Tighten the EGR pipe nut at the exhaust manifold.
Tighten
Tighten the nut to 60 N.m (44 lb ft).
- Lower the vehicle.
- Install the EGR valve pipe bolt at the water pump housing.
Tighten
Tighten the bolt to 28 N.m (21 lb ft).
CAUTION:
Refer to Fastener Caution .