LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (Antilock Brake System) >> Repair Instructions >> Rear Wheel Speed Sensor Ring Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Wheel Speed Sensor & Connector
    GM631238Courtesy of GENERAL MOTORS COMPANY
  1. Remove the wheel speed sensor (2). Refer to Rear Wheel Bearing and Hub Replacement (FE1, FE3) , Rear Wheel Bearing and Hub Replacement (FE7) .
    2. Fig 2: View Of Wheel Speed Sensor Reluctor
    GM631451Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not reuse the wheel speed sensor reluctor after it has been removed.

  2. Remove and discard the wheel speed sensor reluctor (1).
scientia non olet · About LEMON Manuals