LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Mechanical - 4.6L - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Primary Timing Chain Guide Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Primary Camshaft Drive Chain Guide & Bolts
    GM207533Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Install the primary camshaft drive chain guide (1) and retaining bolts.

    Tighten 

    Tighten the primary camshaft drive chain guide bolts to 25 N.m (18 lb ft).

  2. Install the front cover. Refer to Engine Front Cover Replacement .
scientia non olet · About LEMON Manuals