LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2009 >> Vibe Base, 2.4 0, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Mechanical - 4.6L - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Oil Pump Outlet Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pump. Refer to Oil Pump Replacement .
    2. Fig 1: Identifying Primary Timing Gear Alignment Marks
    GM517185Courtesy of GENERAL MOTORS COMPANY
  2. Align the primary timing marks (1) using the J 39946 .
  3. Remove the secondary camshaft drive chains. Refer to Secondary Camshaft Intermediate Drive Chain Replacement - Right Side , and Secondary Camshaft Intermediate Drive Chain Replacement - Left Side .
  4. Remove the primary drive chain tensioner. Refer to Primary Camshaft Intermediate Drive Chain Tensioner Replacement .
    5. Fig 2: View Of Oil Outlet Tube Bolts
    GM928361Courtesy of GENERAL MOTORS COMPANY
  5. Remove the oil outlet tube bolts (1-5).
  6. Remove the oil outlet tube.
    7. Fig 3: View Of Oil Outlet Tube O-Ring
    GM928363Courtesy of GENERAL MOTORS COMPANY
  7. Remove and discard the oil outlet tube O-ring.
  8. Clean and inspect the oil outlet tube.
scientia non olet · About LEMON Manuals